Large TV Setup Guide: Find the Right Stand, Height & Placement

If you’ve just bought a 65‑inch or bigger screen, you probably wonder where to put it. The answer isn’t just about space – it’s about comfort, safety and looks. Below you’ll find straightforward steps that let you set up a large TV without guessing.

Choosing the Right TV Stand

First, measure the TV width. Most manufacturers list the exact width in inches, but a quick tape check helps. Your stand should be at least as wide as the TV, ideally a few inches wider. This prevents the screen from overhanging and looks balanced.

Next, look at the stand’s depth. A depth of 15‑20 cm (6‑8 in) gives enough room for the TV’s base and any cables. If the stand is too shallow, the TV may tip forward when you adjust the tilt.

Weight capacity matters too. Large screens can weigh 70 lb (30 kg) or more. Check the spec sheet on the stand and make sure it’s rated for at least that weight. A sturdy wood or metal frame with reinforced brackets is a safe bet.

Finally, think about style. A low‑profile console hides wires and keeps the view clean, while a taller cabinet offers storage for media gear. Pick a finish that matches your room’s décor – a light oak works in a bright living area, a dark metal suits a modern loft.

Getting the Perfect Mount Height

The goal is to keep the screen’s center roughly at eye level when you’re seated. Sit on your couch, measure the distance from the floor to your eyes – usually 42‑44 in (106‑112 cm). That measurement becomes the target height for the TV’s midpoint.

Measure your TV’s height (top to bottom) and divide by two. Add that half‑height to the eye‑level number, then subtract half the TV’s height again. The result tells you where the top edge of the TV should sit on the wall.

When you mount, use a stud‑finder to locate wall studs. Anchor the mount securely to at least two studs to support the weight. A full‑motion bracket is handy if you need to swivel for different seating spots, but a fixed tilt mount keeps the install simple and often cheaper.

Cable management is the final piece. Run HDMI and power cables through a wall‑plate or use a cord‑cover that matches the wall colour. This keeps the area tidy and reduces tripping hazards.

With the right stand, proper height and clean wiring, your large TV becomes the centerpiece of the room without feeling bulky or unsafe. Take a step back, sit down and enjoy your favourite show – you’ve earned it.